Setting The Xm Satellite Radio Preset Channels - Yamaha DVX-700 Owner's Manual

LISTENING TO XM ® SATELLITE RADIO BROADCASTS
Direct number access mode
1 Press SRCH MODE on the remote control repeatedly
to select "ALL CH SEARCH" or "CAT SEARCH".
2 Press the Numeric keypad 0-9 to enter the desired
3-digit channel number.
For example, to select the channel "123", enter 123
using Numeric keypad 0-9.
Hints
– To enter a 1-digit or 2-digit channel number, press
the Numeric keypad 0-9 on the remote control
and then press ENTER to confirm the input
number.
– Instead of pressing ENTER to tune into the
channel immediately, you can wait a few seconds
until this unit confirms the entered channel
number.
■ Setting the XM Satellite Radio
preset channels
You can use this feature to store up to 40 XM Satellite
Radio channels (A1 to E8: 8 preset channel numbers in
each of the 5 preset channel groups). You can recall any
preset channel easily by selecting the preset channel group
and number as described in "Preset Search mode" on
page 51.
SRCH MODE
TOP MENU
INFO.
A-E/CAT.
SETUP
TV/ STB
1 Search for a channel you want to set as a preset
channel by using one of the XM Satellite Radio search
modes.
Refer to "Basic XM Satellite Radio operations" on
page 51 for details.
0 4 3 X M U
Currently selected channel number
52
En
AUTO/ MANUAL
MEMORY
MENU
PRESET/CH
ENTER A-E/CAT.
RETURN
CODE SET
2 Press MEMORY.
The MEMORY indicator flashes in the front panel
display for approximately 30 seconds.
Flashes
Note
You must proceed to and carry out steps 3 and 4 while
the MEMORY indicator is flashing in the front panel
display.
3 Press PRESET/CH
preset channel group and number (A1 to E8) while the
MEMORY indicator is flashing.
The preset channel number appears in the front panel
display.
C 5 0 4 3 X M U
Selected preset channel group and number
Hint
You can select the preset station group (A to E) by
pressing A-E/CAT.
4 Press MEMORY to set the selected XM Satellite
Radio channel as a preset channel while the
MEMORY indicator is flashing.
A colon (:) appears next to the preset channel number
for confirmation, and the MEMORY indicator turns
off in the front panel display.
C 5 : 0 4 3 X M U
Colon (:)
Note
Once you set a new preset channel, the one previously
stored in the same preset channel group and number is
overwritten.
/ repeatedly to select a
Flashes
/ repeatedly.
Goes off