JETWAY 754GT4-SLI-G User Manual page 21

(12) Secondary IDE Connector (40-pin block): IDE2
This connector connects to the next set of Master and Slave hard disks. Follow the
same procedure described for the primary IDE connector. You may also configure two
hard disks to be both Masters using one ribbon cable on the primary IDE connector and
another ribbon cable on the secondary IDE connector.
•
Two hard disks can be connected to each connector. The first HDD is referred to as the
"Master" and the second HDD is referred to as the "Slave".
•
For performance issues, we strongly suggest you don't install a CD-ROM or DVD-ROM
drive on the same IDE channel as a hard disk. Otherwise, the system performance on this
channel may drop.
(13) Serial-ATA Port connector: SATA1 / SATA2 / SATA3/ SATA4
This connector support the provided Serial ATA and Serial ATA2(Only for 754GT4-SLI &
754GT4-Ultra Series) IDE hard disk cable to connecting the motherboard and serial ATA
hard disk.
IDE2
Pin 1
Secondary IDE Connector
SATA2
SATA1
SATA4
SATA3
Serial-ATA1 & 2 Compatible Connectors
18