Table of Contents
Advertisement
Onboard AC97 Audio Device
This item allows you to decide to enable/disable/auto the chipset family to support AC97
Audio. The settings are: Enabled, Disabled, Auto.
Onboard LAN Device
Setting to [Auto] allows the BIOS to auto-detect the LAN controller and enable it. Setting
options:[Auto] and [Disabled] .
Onboard LAN Device Boot ROM
This item is used to enable or disable the MAC LAN Boot ROM. Setting
options:[Disabled],[Enabled].
Onchip USB
This setting allows you to enable/disable the onboard USB controller. Selecting [Enabled]
enables the system to support both USB 1.1 and 2.0 or USB 1.1 spec. setting
options:[Disabled],[Enabled].
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have
a USB keyboard. The settings are: Enabled, Disabled.
3-7-3 OnChip Super IO Function
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Onboard FDD Controller
Select Enabled if your system has a floppy disk controller (FDD) installed on the system board
and you wish to use it. If you install add-on FDC or the system has no floppy drive, select
Disabled in this field. The settings are: Enabled and Disabled.
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and the second serial ports. The
settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.
Onboard Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that Provides Standard, ECP,
and EPP features. It has the following option:
Disabled
Phoenix – AwardBIOS CMOS Setup Utility
Onboard Super IO Function
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Half
378/IRQ7
SPP
3
F6:Optimized Defaults
Menu Level >>
F7:Standard Defaults
32
Item Help
F1:General Help
Advertisement
Table of Contents
