Miele HS19 Operating Instructions Manual page 65

Technical safety
Batteries will deplete over time. They can then leak cor-

rosive fluids. Avoid contact with the eyes and skin. In the
event of contact, rinse thoroughly with water and seek
medical advice.
The AP01/AP02/AP03 battery, the LG01/LG02 charger

and the LS03/LS04 charger cradle are designed for use
with the Miele HS19 vacuum cleaner. For safety reasons,
the vacuum cleaner must not be used with a battery, char-
ger or charger cradle produced by another manufacturer.
If you are using a mains plug adapter, make sure that it is

approved for continuous operation.
Temporary or permanent operation on an autonomous

power supply system or a power supply system that is not
synchronised with the mains power supply (e.g. island net-
works, back-up systems) is possible. A prerequisite for op-
eration is that the power supply system complies with the
specifications of EN 50160 or an equivalent standard.
The function and operation of the protective measures
provided in the domestic electrical installation and in this
Miele product must also be maintained in isolated opera-
tion or in operation that is not synchronised with the mains
power supply, or these measures must be replaced by
equivalent measures in the installation. As described, for
example, in the current version of BS OHSAS 18001–2
ISO 45001.
Charge and use the AP01/AP02/AP03 battery at an am-

bient temperature between 0 °C and 45 °C.
Using the AP01/AP02/AP03 battery outside of this ambi-
ent temperature range will limit its performance.
en - Warning and Safety instructions
65