Download Print this page

Yamaha DSP-A1 Owner's Manual: Plugging In This Unit

Natural sound av amplifier.
Hide thumbs

Advertisement

PLUGGING IN THIS UNIT

• After completing all connections, plug the AC power cord
into a convenient AC outlet.
(General model)
1
*
AC OUTLET(S)
(U.S.A., Canada, China and General models)
.......................................................... 2 SWITCHED OUTLETS
(Europe, U.K. and Australia models)
............................................................. 1 SWITCHED OUTLET
Use these to connect the power cords from your components
to this unit.
The power to the SWITCHED outlets is controlled by this unit's
STANDBY/ON switch or the provided remote control
transmitter's SYSTEM POWER ON and STANDBY keys.
These outlets will supply power to any connected unit
whenever this unit is turned on.
The maximum power (total power consumption of components)
that can be connected to the SWITCHED AC OUTLET(S) is as
follows.
U.S.A. model: 120W
Except U.S.A. model: 100W
22
+
A
B
A OR B
VOLTAGE SELECTOR
FRONT
REAR
(SURROUND)
2
*
1 UNSWITCHED OUTLET
• Unplug the AC power cord from the AC outlet if this unit is
not to be used for a long period of time.
IMPEDANCE SELECTOR
SET BEFORE POWER ON
MAIN
: 4 MIN. /SPEAKER
CENTER
A B : 4 MIN. /SPEAKER
A OR B : 4 MIN. /SPEAKER
REAR
: 4 MIN. /SPEAKER
FRONT
EFFECT : 6 MIN. /SPEAKER
MAIN
: 8 MIN. /SPEAKER
CENTER
A B : 4 MIN. /SPEAKER
A OR B : 8 MIN. /SPEAKER
REAR
: 8 MIN. /SPEAKER
FRONT
EFFECT : 8 MIN. /SPEAKER
AC OUTLETS
SWITCHED
UNSWITCHED
I00W MAX. TOTAL
200W MAX.
*
The power to the UNSWITCHED outlet is not controlled by this
unit's STANDBY/ON switch or the provided remote control
transmitter's SYSTEM POWER ON and STANDBY keys. This
outlet will supply power to the connected unit even if this unit is
in the standby mode.
The maximum power (total power consumption of components)
that can be connected to the UNSWITCHED AC OUTLET is as
follows.
U.S.A. and Canada models: 180W
China and General models: 200W
2
*
Voltage Selector (China and General Models
only)
The voltage selector on the rear panel of this unit must be
set for your local main voltage BEFORE plugging into the
AC main supply.
Voltages are 110/120/220/240 V AC, 50/60 Hz.
To AC outlet
1

Advertisement

   Related Manuals for Yamaha DSP-A1

Comments to this Manuals

Symbols: 0
Latest comments: