I Connecting To The Fluidra Pool App - GRE swim & fun HPGIC Instructions For Installation And Use Manual

2.5 I Connecting to the Fluidra Pool App

Mobile device
The heat pump can be remotely controlled from a smartphone or tablet, via the Fluidra Pool app available for iOS and
Android systems.
Before connecting to the Fluidra Pool app, ensure that you:
• Use a Wi-Fi-enabled smartphone or tablet.
• Use a Wi-Fi network with a reasonably strong signal when connecting to the heat pump: the
Wi-Fi signal must be detectable at the place where the appliance is used. If this is not the case,
a technical solution must be provided to amplify the existing signal.
• Rest close to the appliance and have your home Wi-Fi network password at the ready.
1. Download the Fluidra Pool app (QR code on the back of the product).
2. Unlock the keypad: the main menu is displayed
3. Press and hold
+
4. Open the application and follow the steps described in the app to add the heat pump.
Home Wi-Fi
network
for 5 seconds. SET flashes.
Heat pump
EN
17