Table of Contents
Advertisement
8 Programming personal data
The scales can store data for up to 10 people: sex, age, height.
1. Touch button
3
2. Choose the unit of weight (as described in chapter 4) and press the SET
3. The last used personal data is flashing in the display.
4. Now press
- button
for the user profile.
5. Press the SET-button
display. You can choose from four values: Woman, Man, Woman (athletic), Man (athletic).
6. Set your sex by pressing the
in the display.
7. Press the SET-button
display.
8. Select your height using the
9. Press the SET-button
10. Set your age by pressing the
11. Press the SET-button
12. The settings are now concluded.
9 Weighing and measuring the body analysis values
1. Touch button
3
2. Choose the unit of weight (as described in chapter 4) and press the SET
3. The memory location flashes in the display.
4. By pressing the
P6).
5. Your personal data is displayed.
6. Wait until "0.0" appears on the display. Step barefoot onto the scales and stand still. Place your
feet on the electrodes
7. Now your weight flashes on the display and body analysis begins. Remain still. After a few
seconds the measured values for body fat, body water, KCAL (recommended calories value),
bone weight and muscle mass are displayed. The series of measured values is repeated twice
in the display. The scales then switch off automatically. Step off the scales.
NOTE The data in the following table is for orientation purposes only. If you have any questions
about your health, please consult your doctor. KCAL values are indications that are depending on
age, weight, sex and physical strain.
Body fat proportion range in %
Age
low
10 - 15
3.0 - 16.0
16 - 30
3.0 - 16.4
31 - 60
3.0 - 17.0
61 - 80
3.0 - 17.6
to switch to weight mode - "0.0 kg" appears in the display.
or
- button
2
to confirm the selection. Now the symbol for the sex is flashing in the
4
- button
to confirm the selection. The preset height starts flashing in the
4
- button
to confirm the selection. The preset age starts flashing in the display.
4
- button
to confirm the setting.
4
to switch to weight mode - "0.0 kg" appears in the display.
- button
and
2
. First, your weight is displayed.
7
female (%)
normal
high
16.1 - 21.0
21.1 - 29.6
16.5 - 22.0
22.1 - 30.4
17.1 - 22.4
22.5 - 31.4
17.7 - 23.0
23.1 - 32.0
to select the desired memory location (P0 - P9)
5
or
- button
2
and
- button
2
or
- button
2
- button
, you may choose the memory location (P1-
5
very high
low
29.7 - 50
3.0 - 13.0
30.5 - 50
3.0 - 13.6
31.5 - 50
3.0 - 14.0
32.1 - 50
3.0 - 14.4
button to confirm.
4
to select the appropriate symbol
5
.
5
.
5
button to confirm.
4
male (%)
normal
high
13.1 - 17.4
17.5 - 25.6
13.7 - 18.0
18.1 - 26.4
14.1 - 1 8.6
18.7 - 27.0
14.5 - 19.0
19.1 - 28.0
very high
25.7 - 50
26.5 - 50
27.1 - 50
28.1 - 50
5
Advertisement
Table of Contents
