Programming Personal Data; Weighing And Measuring - Medisana 40438 Manual Instruction

40438_Analysewaage_Benelux_18122014.qxd:Kompakt-GA
5 Weighing "Step-on"-function
1. Make sure the scales are on a firm, level surface. If you only want to weigh yourself but have moved
the scales just before, you must first initialise the scales. To do this, press your foot on the middle
of the surface of the scales. "0.0 kg" appears in the display. When the scales switch off, they are
ready for the "step-on" function. This procedure is not necessary if you have not moved the scales.
2. Step onto the scales and stand still. The device switches on automatically and the display
shows "0.0 kg".
3. Your weight is measured, flashes three times and is then finally displayed.
4. Step down from the scales. The scales switch off automatically after approx.10 seconds.

6 Programming personal data

The scales can store data for up to 10 people: sex, height, age. The scales have preset values.
These are: kg, female, 25 years old, 165 cm.
1. Press the SET
2. Now press
3. Press the SET-button
= male
4. Set your sex by pressing the
display.
5. Press the SET
6. Select your height using the
7. Press the SET
8. Select your age using the using the
9. Press the SET
10. The settings are now concluded. In the display "0.0" is shown.

7 Weighing and measuring

1. Press the SET
2. By pressing the DOWN- and UP - buttons you may choose the memory location (0 - 9).
3. Your personal data is displayed.
4. Wait until "0.0" appears on the display. Step barefoot onto the scales and stand still. Place your feet
on the electrodes
5. The display shows the values measured for the body fat and body water in one display, and then KCAL,
muscle mass, bone mass value will be shown in one display after. The series of measured values are
repeated 3 times in the display. The scales then switch off automatically, step off the scales.
NOTE:
Auto user selection by your last weight. Scale auto chooses user once standing barefoot on the
platform, then measuring the body values. The last body values of each user will be displayed by
pressing SET
Body fat proportion range in %
Age
6-15
16-30
31-60
61-80
NOTE:
The data in the table is for orientation purposes only. If you have any questions about your
proportion of body fat, please consult your doctor.
button to switch on the scales. The memory location is flashing in the display.
▲ ▼
- or -button to select the desired memory location (0 - 9) for the user profile.
to confirm the selection. Now the symbol for the sex is flashing in the display.
= female = male/athlete
▲
- or
button to save the setting. The preset height starts flashing in the display.
▲
- and
button to save the setting. The preset age starts flashing in the display.
▲
button to save the setting.
body fat, water content and muscle mass
button to switch on the scales. The memory location flashes in the display.
. First, your weight is displayed.
and selecting the personal memory.
Female (%)
low normal high
3.0-16.0 16.1-21.0 21.1-29.6
3.0-16,4 16.5-22.0 22.1-30.4
3.0-17.0 17.1-22.4 22.5-31.4
3.0-17.6 17.7-23.0 23.1-32
18.12.2014
= female/athlete
▼
-button to select the appropriate symbol in the
▼
-buttons.
▼
- and -buttons.
Male (%)
very high
low normal
29.7-50 3.0-13.0 13.1-17.4
30.5-50 3.0-13,6 13.7-18.0
31.5-50 3.0-14.0 14.1-18.6
32.1-50 3.0-14.4 14.5-19.0
13:29 Uhr Seite 13
ENGLISH ENGLISH ENGLISH
briefly
high very high
27.5-25.6 25.7-50
18.1-26.4 26.5-50
18.7-27.0 27.1-50
19.1-28 28.1-50
13