Disable Fast Startup; Disable The Built-In Battery; Replace A Cru; Base Cover Assembly - Lenovo ThinkPad X13 Gen 5 User Manual

Hide thumbs Also See for ThinkPad X13 Gen 5:
Table of Contents

Advertisement

Disable Fast Startup

Follow the instructions to disable Fast Startup.
Step 1.
Go to Control Panel and view by Large icons or Small icons.
Step 2.
Click Power Options, and then click Choose what the power buttons do on the left pane.
Step 3.
Click Change settings that are currently unavailable at the top.
Step 4.
If prompted by User Account Control (UAC), click Yes.
Step 5.
Clear the Turn on fast startup check box, and then click Save changes.

Disable the built-in battery

Follow the instructions to disable the built-in battery.
Step 1.
Restart your computer. When the logo screen is displayed, immediately press F1 to enter the UEFI
BIOS menu.
Step 2.
Select Config ➙ Power. The Power submenu is displayed.
Step 3.
Select Disable Built-in Battery and press Enter.
Step 4.
Select Yes in the Setup Confirmation window.
The built-in battery is disabled and the computer turns off automatically.
Wait three to five minutes to let the computer cool.
Note: If your computer cannot enter the UEFI BIOS menu, you cannot disable the built-in battery. To ensure
safety when you replace a CRU, it is recommended to do the following:
• For the built-in battery connected to the system board with cables: Disconnect the battery cables.
• For the CRUable built-in battery connected to the system board with comb connectors: Remove the
battery. For the removal procedure, refer to the built-in battery replacement instructions in this
documentation.
• For the non-CRUable built-in battery connected to the system board with comb connectors: Call Lenovo
Customer Support Center for help.
To check whether the built-in battery on your computer is a CRU, see the CRU list in Chapter 6 "CRU
replacement" on page 51.

Replace a CRU

Follow the replacement procedure to replace a CRU.

Base cover assembly

Follow the instructions to replace the base cover assembly.
Prerequisite
Before you start, read
Generic Safety and Compliance Notices
Note: Do not remove the base cover assembly when your computer is connected to ac power. Otherwise,
there might be a risk of short circuits.
For access, do the following:
52
ThinkPad X13 Gen 5 and ThinkPad X13 2-in-1 Gen 5 User Guide
and print the following instructions.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkpad x13 2-in-1 gen 5

Table of Contents