Connect To A Cellular Network (For Selected Models) - Lenovo ThinkPad X13 Gen 5 User Manual

Connect to a cellular network (for selected models)

To connect a 4G or 5G cellular data network, you must have a wireless wide area network (WWAN) card and
a nano-SIM card installed. The nano-SIM card might come with your computer by countries or regions. If no
nano-SIM card is shipped, you will need to purchase one from authorized service carriers.
Notes:
• Depending on the model, your computer might have no WWAN card installed.
• The 4G or 5G cellular service is provided by authorized mobile service carriers in some countries or
regions. You must have a cellular plan from a service carrier to connect to the cellular network. The cellular
data plan might vary by location.
• Network connection speeds might also vary by location, environment, network conditions and other
factors.
Establish a cellular connection
This section introduces how to establish a cellular connection.
Step 1. Turn off the computer.
Step 2. Insert a straightened paper clip into the hole in the nano-SIM-card tray. The tray ejects. Install a
nano-SIM card as shown and insert the tray into the nano-SIM-card slot. Note the orientation of the
card and ensure that it is seated correctly.
Step 3. Turn on the computer.
Step 4. Click the network icon, and then select the cellular network icon
information, if needed.
from the list. Provide required
.
Chapter 2 Get started with your computer
13