Vertex Standard VX-150 Operating Manual page 38

Set Mode
Set Item 24 [ CLK SFT ]
Function: Shifting of CPU clock frequency.
Available Values: ON/OFF
Default: OFF
This function is only used to move a spurious response "birdie" should it fall on a desired
frequency.
Set Item 25 [ SQL TYP ]
Function: Select the Tone Encoder and/or Decoder mode.
Available Values: OFF/T/TSQ/DCS
Default: OFF
T: CTCSS Encoder
TSQ: CTCSS Encoder/Decoder
DCS: Digital Coded Squelch Encoder/Decoder
Set Item 26 [ TN SET ]
Function: Setting of the CTCSS Tone Frequency
Available Values: 39 standard CTCSS tones
Default: 100 Hz
In this mode, press the [ F ] key, then press the PTT key, to save the new setting and exit to
normal operation.
Set Item 27 [ DCS SET ]
Function: Setting of the DCS code.
Available Values: 104 standard DCS codes.
Default: 023
In this mode, press the [ F ] key, then press the PTT key, to save the new setting and exit to
normal operation.
Set Item 28 [ DTMF ]
Function: Programming the DTMF Autodialer.
See page 26 for details.
Set Item 29 [ CW ID ]
Function: Program and activate the CW Identifier (used during ARTS operation).
See page 28 for details.
Set Item 30 [ S SRCH ]
Function: Activate the Smart Search feature.
See page 23 for details.
36 VX-150 O M
PERATING ANUAL