Tone Calling (1750 Hz); Ani Operation; Number Identification) - Vertex Standard VX-150 Operating Manual

Advanced Operation
If the repeaters in your country require a 1750-Hz burst tone for access (typically in Eu-
rope), you can set the MONI key to serve as a "T
configuration of this switch, we again use the Menu to help us.
Press the [ F ] key, then press the [ 0 ( SET ) ] key to enter the Set mode.
Rotate the DIAL to select Menu Item #19 ("
Press the [ F ] key to enable adjustment of this Menu item.
Rotate the DIAL to select "
Press the PTT key to save the new setting and exit to normal operation.
ANI O
PERATION
When you activate the ANI feature, the DTMF tones stored in ANI memory will automati-
cally be sent whenever you press the PTT button.
Here is the ANI storage procedure:
Press the [ F ] key, then press the [ 0 ( SET ) ] key, to enter the Set mode.
Rotate the DIAL to select Menu #36 ("
Press the [ F ] key to enable changing of this Menu item.
Press the [ F ] key, then press the [ F/W ] key again, to begin entry of the letters and
numbers in the ANI code.
Rotate the DIAL to select the first letter or number in the ANI code. When the correct
character has been selected, press the [ ] key to move on to the next character.
Repeat step
When you have completed entry of the ANI code, press the [ F ] key.
Press the PTT key to save the settings and exit to normal operation.
To activate the ANI identifier:
Press the [ F ] key, then press the [ 0 ( SET )] key, to enter the Set mode.
Rotate the DIAL to select Menu #36 ("
Press the [ F ] key to enable changing of this Menu item.
Rotate the DIAL to set the ANI function ON.
When you have made your selection, press the PTT key to save the new setting and exit
to normal operation.
14
T C
ONE ALLING
" on the display.
( A
UTOMATIC
as many times as necessary to complete the ANI code.
( 1750 Hz )
C
" switch instead. To change the
ONE ALL
/
").
N I
UMBER DENTIFICATION
").
").
VX-150 O
)
M
PERATING ANUAL