Haier ES50V-F1(EU) Instruction Manual page 11

Bath Separately Mode (F1 Serie)
Press the "Smart" button to choose the number of bath separately at one time. The number
of bath separately at one time will be switched circularly between 1, 2 and 3.
Digital 1 is illumed: It is suitable for 1 person to take a bath.
Digital 2 is illumed: It is suitable for 2 persons to take a bath.
Digital 3 is illumed: It is suitable for 3 persons to take a bath.
The machine will automatically complete the heating according to the number of bathing
people you choose.
50L water can be set to bath for 1 person and 2 persons.
80L / 100L water can be set to bath for 1 person, 2 persons and 3 persons.
BPS Bacteriostatic Mode (F1/TF7/VH3 Series)
Press the "BPS" / «
ing icon « » / «
a few seconds (80°C for F1 series and 75°C for TF7/VH3 serie), the actual water temperature
will be displayed. When the «
static function is completed, and the machine will automatically exit the BPS bacteriostatic
mode and return to the normal mode.
Press « » button again to switch to ECO-BPS-Instant heating in turn(VH3 Serie).
ECO Mode (TF7/VH3 Series)
Press the "ECO" / « Press the "ECO" / «
corresponding icon « corresponding icon «
In this mode, the water heater will automatically memorize and analyze user's habits of using In this mode, the water heater will automatically memorize and analyze user's habits of using
water, realize intelligent operation, to meet user's water demand and save electric energy to water, realize intelligent operation, to meet user's water demand and save electric energy to
the most extent. the most extent.
Press "ECO" button again to exit ECO mode and return to normal mode.(TF7 Serie) Press "ECO" button again to exit ECO mode and return to normal mode.(TF7 Serie)
Press « Press « » button again to switch to ECO-BPS-Instant heating in turn(VH3 Serie). » button again to switch to ECO-BPS-Instant heating in turn(VH3 Serie).
This function can memorize when power off, but it will reopen the memory of user's habits of This function can memorize when power off, but it will reopen the memory of user's habits of
using water. using water.
MAX Mode ( TF7 Serie)
Press the "MAX" button in the state of power-on, entering the MAX mode and illuming the
corresponding icon «
and the setting temperature range is 35-75°C. After heating, the machine will automatically
exit the MAX mode and return to the normal mode.
In this mode, the double tanks are heated simultaneously, which can meet the user's demand
of using water rapidly.
Normal Mode ( TF7/VH3 Series)
When the user does not choose the above modes, the machine will enter the normal mode.
In this mode, the user can adjust the setting temperature according to the demand, and the
range of setting temperature is 35-75°C. The function of heat retention is carried out after
heating.
Temperature Setting ( TF7 Serie)
In the MAX mode and ECO mode, press the "SET" button to adjust the setting temperature.
Each time the "SET" button is pressed, the setting temperature will increase by 5°C. The
adjustment range of setting temperature is 35ºC-75°C. When pressing the "SET" button to set
the temperature, the current setting temperature flashes first, and then press the "SET" button
to change the temperature. No operation within 6s or pressing other buttons except the «
and "SET" button indicate that the setting temperature is confirmed, and then the actual
temperature is displayed.
» button, entering the bacteriostatic mode and illuming the correspond-
» /« BPS- » . After the default maximum heating temperature flashes for
» / « » /« BPS- » extinguishs, it indicates that the bacterio-
» button in the state of power-on, entering the ECO mode and the » button in the state of power-on, entering the ECO mode and the
» / « ECO- » are illumed. » / « ECO- » are illumed.
». In this state, the two tanks are heated to the setting temperature,
»
11