Meal To Meal Maintenance Every Time - Weber SmokeFire SEAR+ ELX4 Owner's Manual

Table of Contents

Advertisement

Meal to Meal Maintenance Every Time You Cook
To ensure that your WEBER SMOKEFIRE grill operates safely and smoothly
every time you start it up, here are some steps to follow before you start
grilling:
1. Visually check the cookbox and clean the ash and grease system drawer
before every cook (A). If the disposable drip pan has grease in it, discard
it and replace with a new one.
NOTE: ALWAYS USE A DISPOSABLE DRIP PAN INSIDE THE ASH AND GREASE
SYSTEM DRAWER.
WARNING: DO NOT REMOVE THE ASH AND GREASE SYSTEM DRAWER WHILE
OPERATING THE GRILL, OR IF STILL HOT AFTER SHUTDOWN. Frequently replace
the disposable drip pan before igniting the grill to reduce the risk of a grease fire.
2. Make sure the hopper is filled with your choice of WEBER ALL NATURAL
HARDWOOD PELLETS (B).
3. Check that the power cord is connected to the bottom of the hopper
before plugging it into an electrical outlet (C).
m WARNING! Keep the power cord and extension cord away from any heated
surfaces or water and arranged so as not to cause a tripping hazard. Use
the power cord management strap to avoid these hazards (D).
4. Turn the power supply switch, located on the bottom of the hopper, to the
on position (E).
A
BEFORE IGNITING
B
C
D
E
11
weber.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smokefire sear+ elx6

Table of Contents