Format Netdisk; Enable Netdisk For Other Users; Unbind Netdisk - Ximeta NetDisk Mini MNC10-40 User Manual

®
NetDisk User Manual

8.4.4 Format NetDisk.

- Before you can use the new Aggregated / Mirrored NetDisk, the Primary Net-
Disk needs to be formatted. Please refer to Chapter 9 Formatting NetDisk.
8.4.5 Register Aggregated / Mirrored NetDisk for other users
- Once the Primary NetDisk has been successfully formatted, enable the Primary
NetDisk or add both Primary and Secondary NetDisks to all the other PCs that
want to use the Aggregated / Mirrored NetDisk.
- The Secondary NetDisk will automatically be enabled once Primary NetDisk is
enabled.
NOTE: The NetDisk Administrator will automatically detect the mode of the Primary
and Secondary NetDisk when enabled on additional PCs. Only the Primary Net-
Disk
may be enabled.

8.4.6 Unbind NetDisk

1. Before NetDisk can be unbound, both Primary and Secondary NetDisks must be
disabled from all PCs using the Aggregated / Mirrored NetDisk.
NOTE: For more information on disabling NetDisk, please refer to 8.4.1 Disable
NetDisk.
2. Go to the PC that was used to perform the Aggregation / Mirroring.
3. Go to NetDisk Aggregation & Mirroring window. The color of the disabled Master
NetDisk will be Gray. If not, press Status button
XIMETA, Inc
Aggregation
NetDisk Direct Attached Storage / NDAS
Mirroring
19
®
www.XIMETA.com