Download  Print this page

Xerox WNA-100 User Manual page 23

Wireless network adapter
Hide thumbs


Information for European Users
The print server and its built-in 802.11a, 802.11b, and 802.11g wireless technology is in
compliance with the Class B Information Technology Equipment requirements and other
relevant provisions of European Directive 1999/5/EC. The limits for Class B equipment were
derived for typical residential environments to provide reasonable protection against
interference with licensed communications devices. The internal function is a radio device
using the 2.4 GHz frequency band (2.400 GHz - 2.4835 GHz). It is intended for wireless
communication with other 802.11a, 802.11b, and 802.11g-enabled devices in an indoor
The use of 802.11a, 802.11b, and 802.11g wireless technology in certain countries may be
restricted. Before using 802.11x products, please confirm with the frequency management
authority in the country where you plan to use it. Many countries allow indoor use only. In
Italy, general authorization is required if used outside. In France, the use of certain channels is
restricted outdoors. In some situations or environments, the use of 802.11x wireless
technology might be restricted by the proprietor of the building or responsible representatives
of the organization, for example, in airplanes, hospitals, or in any other environment where the
risk of interference with other devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies to the use in a specific organization or
environment, you are encouraged to ask for authorization to use 802.11x wireless technology
prior to switching it on. Consult your physician or the manufacturer of personal medical
devices (pacemakers, hearing aids, etc.) regarding any restrictions on the use of 802.11x
wireless technology.
Xerox Corporation cannot be responsible for any failure to satisfy the protection requirements
resulting from a non-recommended modification of the product.
Declaration of Conformity (CE)
Product: Ethernet and Wireless 802.11a, 802.11b, and 802.11g-enabled print server
Model: WNA-100
Xerox Corporation hereby declares that the above referenced product, to which this
declaration relates, is in conformity with the provisions of:
Council Directives 1999/5/EC (March 9, 1999), Radio Equipment and Telecommunications
Terminal Equipment.
Standards used and met in the assessment:
ETSI EN 300-328-2 V1.4.1 (2003-04)
ETSI EN 301-489-1 V1.4.1 (2002-08)
ETSI EN 301-489-17 V1.2.1 (2002-08)
ETSI EN 301-893 V1.2.3 (2003-08)
EN 55024
Xerox WNA-100 Wireless Network Adapter


Table of Contents

  Related Manuals for Xerox WNA-100