Download  Print this page

Xerox WNA-100 User Manual page 22

Wireless network adapter
Hide thumbs


Declaration of Conformity (FCC)
According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers, Xerox declares
under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15
of the FCC rules as a Class B digital device FOR HOME OR OFFICE USE. Each product
marketed is identical to the representative unit tested and found to be compliant with the
standards. Records maintained continue to reflect the equipment being produced can be
expected to be within the variation accepted, due to quantity production and testing on a
statistical basis as required by 47 CFR 2.909.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause
undesired operation.
Product: Ethernet and Wireless 802.11a, 802.11b, and 802.11g-enabled print server
Model: WNA-100
Xerox Corporation hereby declares that the equipment specified above conforms to the above
Standards used and met in the assessment:
EN55022: 1998 Class B; CFR Title 47, Part 15, Subpart B, Subpart C, and Subpart E.
Information for Canadian Users (IC Notice)
The term "IC" before the radio certification number only signifies that Industry of Canada
technical specifications were met. Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired
operation of the device.
This Class B digital apparatus meets all requirements of the Canadian Interference - Causing
Equipment Regulations.
To prevent radio interference to the licensed service, this device is intended to be operated
indoors and away from windows to provide maximum shielding. Equipment that is installed
outdoors is subject to licensing.
This device has been designed to operate with an antenna having a maximum gain of 5 dB.
Antenna having a higher gain is strictly prohibited per regulations of Industry of Canada. The
required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen than the equivalent isotropically radiated power (EIRP) is not more than the required
for successful communication.
Xerox WNA-100 Wireless Network Adapter


Table of Contents

  Related Manuals for Xerox WNA-100