Siemens HN878G4 0 Series User Manual And Installation Instructions page 35

Table of Contents

Advertisement

24  Rails
To thoroughly clean the rails and the cooking compart-
ment, or to replace the rails, you can remove the rails.
24.1 Detaching the rails
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
1.
Lift the rail forwards slightly
2.
Push the entire rail backwards
3.
Clean the rail.
→ "Cleaning products", Page 28
24.2 Fitting the retainers
The retainers may fall out when you detach the rails.
Note:
The retainers at the front differ from those at the rear.
1.
Hook the front retainers with the hook into the round
hole at the top and set them at a slight angle
​ ⁠ and detach it
​ ⁠ .
​ ⁠ and take it out
​ ⁠ .
​ ⁠ .
2.
Hook the front retainers in at the bottom and
straighten them
​ ⁠ .
3.
Hook the rear retainers with the hook into the top
hole
​ ⁠ and push them into the bottom hole
24.3 Attaching the rails
Notes
¡ The rails only fit on the right or left.
¡ For both pull-out rails, ensure that you can pull them
forwards and out.
1.
Hook the rear shelf support into the retainers at the
top and bottom
​ ⁠ and pull it forwards
2.
Hook in the rail at the front
Rails en
​ ⁠ .
​ ⁠ .
​ ⁠ and press it down
​ ⁠ .
35

Advertisement

Table of Contents
loading

Table of Contents