Advertisement
Table of Contents
Jabra Engage 65 Mono
How do I connect my Jabra wireless headset with the Jabra
Link 14201-10 to my Aastra desk phone so I have remote call
control using my headset?
Prerequisites
Jabra Link 14201-10
DHSG connection cable from Aastra
Connection:
1. Connect the AC adapter that is supplied with the headset to the
headset base, and connect the other end to an electrical outlet.
2. Connect the Jabra Link 14201-10 EHS cable with the red band to
the AUX interface on the headset base, and connect the end with
the blue band to the headset base socket that is marked with a
phone icon.
3. Connect the Jabra Link 14201-10 EHS cable single end to the RJ45
adapter that is supplied with your Aastra DHSG Cable Kit.
4. Connect the Aastra DHSG Cable Kit cord with the blue band to the
RJ45 adapter. Connect the Aastra DHSG Cable Kit cord with the
green band to the headset interface on the Aastra desk phone, and
connect the end with the yellow band to the socket for the Aastra
phone expansion module.
https://www.jabra.com/supportpages/jabra-engage-65/9553-553-125/faq/4428a7d3-
b71c-4803-9020-b38c440a375b
16/12/2023 20:14
Page 1 of 2
Advertisement
Table of Contents
Related Manuals for Jabra 9553-553-125
Summary of Contents for Jabra 9553-553-125
- Page 1 1. Connect the AC adapter that is supplied with the headset to the headset base, and connect the other end to an electrical outlet. 2. Connect the Jabra Link 14201-10 EHS cable with the red band to the AUX interface on the headset base, and connect the end with the blue band to the headset base socket that is marked with a phone icon.
- Page 2 Refer to your phone or IT support for assistance. 2. Follow the setup instructions for your Jabra wireless headset. If the headset base requires manual configuration, set the Electronic Hook Switch setting to “DHSG” and set the dial tone switch to position “A”.
Need help?
Do you have a question about the 9553-553-125 and is the answer not in the manual?
Questions and answers