Jabra Engage 65 Mono How Do

Jabra Engage 65 Mono
How do I connect my Jabra Engage to a Polycom IP 320, IP
321, IP 330, IP 331, IP 335, IP 430, IP 450, IP 550, IP 560, IP 650,
IP 670 or VVX series desk phone so I have remote call control
using my headset?
Prerequisites
Jabra Link 14201-17 (EHS – Electronic Hook Switch cable)
Jabra 8800-00-75 (for Polycom IP 320, IP 321, IP 330, or IP 331)
One of the following Polycom desk phones:
SoundPoint IP phones running: SIP software v 3.0 or later, and
BootROM 4.1.0 or later
Polycom IP 321, IP 331 running: SIP software v 3.1.2 rev. C or later
Polycom IP335 running: SIP software v 3.1.2 rev. B or later
VVX series running: SIP software v 3.1.2 rev. B or later, and
BootROM 4.1.2 or later
Connecting your headset to your desk phone
1. Plug one end of the EHS adapter into the serial port on the back of
your phone.
2. Plug the other end into the Jabra base socket labeled AUX.
3. Connect one end of the phone cable supplied with the headset to the
Jabra base marked with a phone icon. Connect the other end to the
back of the phone marked with a headset icon (use cord Jabra 8800-
00-75 for SoundPoint IP phone models 320, 321, 330 or 331).
https://www.jabra.com/supportpages/jabra-engage-65/9553-553-125/faq/9ad3ed00-
a42e-4a70-a279-920882a2e8bb
11/08/2024 15:47
Page 1 of 3