Jabra Engage 65 Mono How Do

How do i use the conference call mode

Hide thumbs Also See for Engage 65 Mono:

How do I use the conference call mode with my Jabra Engage

65?

Jabra Engage 65 Mono

You can set up a conference call with the Jabra Engage 65 by pairing up to

three additional headsets with the same base. You can pair a headset

"over the air" or dock it in the base. If you dock a headset in the base, the

headset must have the same docking interface as the base. For example, a

Jabra Engage mono headset and a Jabra Engage mono or stereo base.

1. Add headset(s) using base docking

1. Undock the primary headset.

2. Dock an additional headset in the base.

3. When the headset has been successfully paired with the base, a voice

prompt is announced in the primary headset. Press the Call button on

the primary headset to accept the additional headset. The audio is then

shared with additional headsets, which are muted by default.

/supportpages/jabra-engage-65/9553-553-117/faq/fc22e06a-4783-42e4-9446-

47c7b06676ea

06/04/2021 20:43

Page 1 of 2

Table of Contents

Do you have a question about the Engage 65 Mono and is the answer not in the manual?

Page 1 How do I use the conference call mode with my Jabra Engage Jabra Engage 65 Mono You can set up a conference call with the Jabra Engage 65 by pairing up to three additional headsets with the same base. You can pair a headset “over the air”...
Page 2 By default, the conference will end automatically for all additional headsets when the call ends. To continue the conference with the additional headsets until the primary headset is docked, change this specific setting in Jabra Direct. /supportpages/jabra-engage-65/9553-553-117/faq/fc22e06a-4783-42e4-9446- Page 2 of 2...