Controller Specifications; Physical Characteristics; Electrical Requirements; Agency Approvals - Xerox Synergix 8855 Supplementary Manual

XES Synergix 8855 Controller Setup Manual for Firmware 7.0

Controller Specifications

Physical Characteristics

The controller is a tower positioned adjacent to the XES Synergix 8855
Printer.

Electrical Requirements

100 - 250 VAC auto-ranging power supply.

Agency Approvals

Safety: UL 1950, CA22.2 No. 950 (CUL), EN 60950 (CE Mark)
EMC: CE Mark, FCC Class A, Canada Radio Interference Regulations
Class A, VCCI Class 1

Hardware Specifications

CPU Power PC 740 operating at 200 Mhz clock speed.
RAM Maximum RAM is 192 MB
Hard disk Ultra SCSI, 7200 rpm internal hard disk drive

I/O Ports

Serial Two 9 pin serial ports provided. The scanner uses one when this
option is connected. The second is used as an input port for
receiving data via serial port connection.
Parallel (IEEE 1284 Compliant) High-density port connector provided.
SCSI 50-pin SCSI Connector provided.
VPI 37 pin D Connector provided.
Scanner 68-pin SCSI Connector provided.
Ethernet Built-in 10/100 Ethernet Network Interface: RJ-45 connection,
supporting TCP/IP only.
Note: An optional, external Ethernet adapter, attached to the
Controller's parallel port, provides additional support for TCP/IP,
IPX/SPX, and NetBEUI protocols. Contact your XES sales or
service representative for specific ordering and setup
information.
8