Xerox Phaser 8860 System Administrator Manual page 88

Input Trays
The following table lists the PCL commands for the input trays supported by the
Phaser 8860MFP multifunction printer. The table also lists the alternate tray used if the
optional input tray is not installed.
Note:
When more than one command is listed, you can use either command.
Input Trays
Tray 1 in multi-sheet mode
Tray 1 in manual feed mode
Tray 2
Tray 3
Tray 4
Autoselect
Current tray/page eject
* The character that follows the "&" in the command is the lowercase letter "L".
PCL 5 Command
<Esc>&l4H
<Esc>&6H
<Esc>&l2H
<Esc>&l3H
<Esc>&l1H
<Esc>&l5H
<Esc>&l8H
<Esc>&l20H
<Esc>&l7H
<Esc>&l10H
System Administrator Guide
B-4
*
Alternate Tray
n/a
n/a
n/a
Tray 2
Tray 1
n/a
n/a