ADJ JOLT BAR FXIP User Manual page 15

I N S TA L L AT I O N G U I D E L I N E S
CONNECTOR PLATE:
Each unit includes a connector plate that can be used to secure two adjacent mounted units together.
To install the connector plate, follow the directions below:
Place the connector plate across the gap between the two units, making sure to align the plate with
the four (4) screw holes. Reinstall the four (4) screws that secure the connector plate in place, as well
as the two (2) additional screws that held the connector plate in its storage position. The installation is
now complete.
15