ADJ JOLT BAR FXIP User Manual page 13

I N S TA L L AT I O N G U I D E L I N E S
CLAMP INSTALLATION
This fixture features a brackets for the attachment of a mounting clamp. There is also a safety cable
loop located on the heatsink rear of encased controller). When mounting the fixture to a truss or
any other suspended or overhead installation, be sure to secure appropriately rated clamps (not
included) to the yoke, and attach a separate SAFETY CABLE of the appropriate weight rating to the
safety cable loop.
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A
SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL NOT FALL IF
SAFETY CABLE:
THE CLAMPS FAIL.
13