Target Groups; Safety Instructions - Dometic FreshJet 4 Series Installation Manual

Hide thumbs Also See for FreshJet 4 Series:
Table of Contents

Advertisement

NOTICE!
Indicates a situation that, if not avoided, can result in property damage.
NOTE Supplementary information for operating the product.
3

Target groups

The electrical power supply must be connected by a qualified electrician who has demonstrated
skill and knowledge related to the construction and operation of electrical equipment and installa-
tions and has received safety training to identify and avoid the hazards involved.
The mechanical installation must be executed by a qualified person who is familiar with the con-
struction and operation of the equipment and the hazards involved.
4

Safety instructions

WARNING! Failure to obey these warnings could result in death or serious injury.
Repair of the appliance may only be carried out by qualified personnel who are familiar with
the risks involved and the relevant regulations. Inadequate repairs may cause serious haz-
ards. For repair service, contact the service center in your country (see
er).
The appliance shall be installed in accordance with national electrical and mechanical instal-
lation regulations.
Electrical appliances are not toys. Keep electrical appliances out of reach of children or
infirm persons. Do not allow them to use electrical appliances without supervision.
Persons whose physical, sensory or mental capa-
bilities or whose lack of experience and knowl-
edge prevent them from using the appliance
safely should not use it without supervision or in-
struction by a responsible person.
Do not undo the upper cover of the appliance in the event of a fire. Use approved extin-
guishing agents. Do not use water to extinguish fires.
The appliance shall be stored in a room without continuously operating open flames (for ex-
ample an operating gas appliance) and ignition sources (for example an operating electric
heater).
The appliance shall be stored horizontally at a dry, ventilated and covered location.
Ensure that the working area is in the open or that it is adequately ventilated before break-
ing into the system or conducting any hot work. A degree of ventilation shall continue dur-
4
dometic.com/deal

Advertisement

Table of Contents
loading

Table of Contents