Dometic FreshJet 4 Series Installation Manual page 16


2.
3.
4.
a) Connect the cables (1) to a cable connector (2).
b) Connect the roof air conditioner with the power supply.
c) Connect the grounding cable to the vehicle's grounding system.
24. Connect the communication cable.
a) Pull out the filter slightly to create a gap for the communication cable (4).
b) Feed the communication cable through the gap and locate the wire in the opening.
c) Connect the communication 4-pin plug into the socket on the side of the display in the ADB. Ensure that
the cable is located into the small opening away from the filter area.
d) Secure excess cable into the holders.
Installing the ADB
25. Stack the duct sections and place against the roof thickness: Ensure that the duct height matches the roof
height or use the table as guide.
16
2
1.
7.
1
6.
4
5.
8.