Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Leica MyVeo
Summary of Contents for Leica MyVeo
- Page 1 MyVeo User Manual 10 748 740 - Version 04...
- Page 2 The information provided by this manual is directly related to the operation of the equipment. Medical decision remains the responsibility of the clinician. Leica Microsystems has made every effort to provide a complete and clear user manual highlighting the key areas of product use. Should additional information regarding the use of the product be required, please contact your local Leica representative.
-
Page 3: Table Of Contents
Status LED on the connection box Carrying Case Care and maintenance Maintenance instructions Disposal What to do if..? Before surgery During surgery Malfunctions of the particular systems Specifications 10.1 Ambient conditions 10.2 Standards fulfilled MyVeo / Ref. 10 748 740 / Version 04... -
Page 4: Introduction
Enter this data in your user manual and always refer to it when The option for performing head-up surgery with MyVeo is possible you contact us or the Leica Service regarding any questions you in combination with the surgical microscope ARveo 8. In this user may have. -
Page 5: Safety Notes
• Store the MyVeo adequately when not in use. MyVeo is an all-in-one surgical visualization headset used with • Ensure that the viewing unit is folded up while storing MyVeo in compatible surgical microscopes and other medical imaging the dedicated case, see chapter 6.6. -
Page 6: Dangers Of Use
CAUTION FL560 is only visualized in 2D. Danger of injury Leica prevents the use of FL560 with the MyVeo all-in- Adjust brightness to minimum acceptable level being one surgical visualization headset since it has not been able to perform surgical procedure. -
Page 7: Signs And Labels
Incremental numbers starting at 1 for each batch e JJ = year (2 digits) MM = month (2 digits) g TT = day (2 digits) h Production starting date Type label headset MyVeo / Ref. 10 748 740 / Version 04... - Page 8 1 for each batch e JJ = year (2 digits) MM = month (2 digits) g TT = day (2 digits) h Production starting date UDI Marking Label hub (01)yyyyyyyy (11)YYMMD (21)zzzzzzzz EU Representative MyVeo / Ref. 10 748 740 / Version 04...
-
Page 9: Design
Danger of injury to the user Do not place the cable between the hub and the all-in- one surgical visualization headset where persons in the operating room can trip over it. MyVeo / Ref. 10 748 740 / Version 04... -
Page 10: Hub
7 SDI Out Left (for external monitor to be connected) 3 Power IN 8 SDI Out Right (for external monitor to be connected) 4 SDI IN left 5 SDI IN right MyVeo / Ref. 10 748 740 / Version 04... -
Page 11: All-In-One Surgical Visualization Headset
3 Rotating screw for adjusting the angle of view 4 Near-eye displays 5 Adjustment knob for upper head strap 6 Function and status LED 7 Knob for adjusting the head strap diameter 8 Input connection cable 9 Connection box MyVeo / Ref. 10 748 740 / Version 04... -
Page 12: Installation
Connect the all-in-one surgical visualization headset Connect power to the Leica surgical microscope and switch it on. Connect the two SDI cables and the CAN BUS of the connecting cable (color coded) to the interface panel of the Leica surgical microscope. - Page 13 Example of positions 1 Possible monitor positions 2 Main surgeon (3D) at 0° 3 Right side surgeon (2D) at 90° 4 Left side surgeon (2D) at 270° 5 Back surgeon (3D) at 180° MyVeo / Ref. 10 748 740 / Version 04...
-
Page 14: Adjust The All-In-One Surgical Visualization Headset
Set viewing angle of the near eye displays 5.2.2 Adjust the near-eye displays The MyVeo must be set as follows when used for the first time: Adjust the rotary screw (2) until the optimum viewing angle is reached. CAUTION... -
Page 15: Operation
Place sterilizable attachments (1) over the turning screws (2). After the sterilizable attachments are attached, the turning screws can no longer be turned. MyVeo / Ref. 10 748 740 / Version 04... -
Page 16: Operate With The Myveo
Connect the cable from the hub to the cable of the all-in-one surgical visualization headset with the connector (1). Operate with the MyVeo When the microscope and the MyVeo are connected, the surgeon can perform surgery by looking at the display of the all-in-one surgical visualization headset. -
Page 17: Touch Display On The Hub Monitor
Carrying Case one surgical visualization headset. The image orientation (here No. 1) is highlighted in light green When not in use, MyVeo should be stored in the dedicated carrying 3 Changes the brightness of the near eye displays (up/down) case. -
Page 18: Care And Maintenance
Do not keep chemicals near the devices. Protect the devices from oil and grease. Never oil or grease the guide surfaces or mechanical parts. To disinfect the MyVeo, use compounds from the surface disinfectant group based on the following active ingredients: • Aldehydes •... -
Page 19: What To Do If
Ensure a pre-operational check before using the system Before using the system like intended to perform head-up surgery with MyVeo, the surgeons must check whether they can perceive 3D view (respectively 2D view) from the all-in-one surgical visualization headset in the correct way. If the image on the all-in-one surgical visualization headset is lost before or during surgery, the surgeon can always perform surgery by using the binocular tubes that are required to be mounted on the microscope. -
Page 20: Specifications
Specifications 10 Specifications 10.1 Ambient conditions For specifications of the Leica surgical microscope please refer to the user manuals of the particular systems and their system sheets. In use +10 °C to +30 °C +50 °F to +86 °F 30 % to 95 % rel. humidity... - Page 21 If use is made of accessories or cables other than those specified in this user manual or approved by the manufacturer of the MyVeo devices, this can lead to an increase in electromagnetic radiation or a reduction in EMC.
- Page 22 Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of the MyVeo, including cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result.
- Page 23 Manufacturer's declaration of electromagnetic compatibility (EMC) MyVeo / Ref. 10 748 740 / Version 04...
- Page 24 CONNECT 10748740–04 en•Copyright © by Leica Microsystems (Schweiz) AG, Medical Division, CH-9435 Heerbrugg, 2023 • Printed 11.2023 Subject to modifications • LEICA and the Leica logo are registered trademarks of Leica Microsystems. WITH US! Leica Microsystems (Schweiz) AG · Max Schmidheiny Strasse 201 · CH-9435 Heerbrugg T +41 71 726 3333 www.leica-microsystems.com...
Need help?
Do you have a question about the MyVeo and is the answer not in the manual?
Questions and answers