Advertisement
M6*16 Bolts
Foot
Avoid excessive tightening of bolts.
STEP 4
1. Line up the screw holes with the feet and columns.
2. Fasten the bolts.
ST2.9x15 Tapping Screw
The frame width is adjustable: 42inch-70 inch is suitable for different desktop.
STEP 5
1. Check both side of desktop before placing the base on the bottom side of the desktop. Adjust the
suitable width. It is suggested that the two sides of the frame side brackets are 2~4inch/5cm~10cm
from the edge of the desktop and fasten screws.
2. As shown below, connect related parts, including control box, extension cable and power cord.
3. Check all bolts and screws. Make sure all bolts and screws are tightened.
ST4.8x16 Tapping Screw
Fasten the bolts
ASSEMBLY INSTRUCTIONS |
9
Advertisement
