Advertisement
AMEND THE DESKTOP HEIGHT DISPLAYED
1.
Keep pressing "M" and "^" for 5 seconds until the display shows "___" five times and
then you will hear the sound of "beep".
2.
Press (2+3) until the display shows "C01 ESC".
3.
Press "^" until the display shows C07 boT.
4.
Press "M" until the display shows numbers and then press "^" or "v" to reach the
desired height.
5.
keep pressing "M" and "^" until the display shows "C07 ToP" to save. Then press "v" to back
to "C01 ESC" and press "M" to exit the current status.
NOTE: The function enables you to change the height shows on the display based on the actual
measurement.
PLUG DETECTION
The function can detect whether the motors are connected properly.
1.
If the display shows "LFT rST" and "rHT rST", it means the motor fails to connect
with the control unit.
2.
Please unplug the plug, check and make sure all the wires are connected correctly
and then plug the plug once more
3.
Simultaneoulsy press "^" and "v" to reset the system.
13
USAGE INSTRUCTION |
Advertisement
