Advertisement
ANTI-COLLISION FUNCTION
Before use, please make sure to remove any obstacles in advance and ensure user
is in a safe position.
1.
Once the desktop encounters an obstacle, the desktop will move in the opposite direction
and will resume moving when the obstacle is removed.
MOVEMENT LIMIT & SELF-STOP POSITIONS
Enable this function only when necessary.
1.
Keep pressing "M" and "^" for 5 seconds until the display shows "___" twice to start
Setting Menu.
2.
Press number 2+3 until the display shows "C01 ESC".
3.
Press "^" until the display shows C06 ToP.
4.
Press "M" until the display shows numbers and then press "^" or "v" to reach the
desired height.
5.
keep pressing "M" and "^" until the display shows "C06 ToP" to save. Then press "v" to back
to "C01 ESC" and press "M" to exit the current status.
NOTE: This function is used to limit the height movement of the desk. Once it is set, the new
upper or lower limitation position will be stored
CHANGE THE DISPLAYED UNIT (CM / INCH)
1.
Simultaneously press "M" and "1" for 5 seconds and the display shows "inch".
2.
Simultaneously press "M" and "1" for 5 seconds and the display shows "cm".
12
| USAGE INSTRUCTION
Advertisement
