Table of Contents
Advertisement
Important instructions for safety and environment
Warning! This
appliance must be
earthed
If the fitted moulded plug
is not suitable for your
socket, then the plug
should be cut off and an
appropriate plug fitted.
Destroy the old plug which
is cut off as a plug with
bared cord could cause a
shock hazard if inserted
into a socket elsewhere in
the house.
The moulded plug on this
appliance incorporates
a 13 A fuse. Should the
fuse need to be replaced
an ASTABEAB approved
BS 1362 fuse of the same
rating must be used. Do
not forget to refit the fuse
cover. In the event of losing
the fuse cover the plug
must not be used until a
replacement fuse cover
has been fitted.
Colour of the replacement
fuse cover must be the
same colour as that visible
on the pin face of the plug.
Fuse covers are available
from any good electrical
store.
Important! Fitting A
Different Plug
As the colours of the
wires in the mains lead
of this appliance may
not correspond with
the coloured markings
identifying the terminals
in your plug proceed as
follows: (See diagram).
1. Connect the green-yellow or green
(Earth) wire to the terminal in the plug
marked 'E' or with the symbol
coloured green and yellow or green.
2. Connect the blue (Neutral) wire to
the terminal in the plug marked 'N' or
coloured black.
3. Connect the brown (Live) wire to
the terminal in the plug marked 'L' or
coloured red.
With alternative plugs a 13 A fuse must
be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact
a qualified electrician.
GREEN &
YELLOW
OR
GREEN
N
22mm.
BLUE
OR
BLACK
6 / 26 EN
6mm.
L
BROWN
OR
RED
CORD GRIP
Refrigerator / User Manual
or
Advertisement
Table of Contents
