Table of Contents
Advertisement
Important instructions for safety and environment
in your mains system.
If you do not know how
to check your water
pressure, ask for the
help of a professional
plumber.
If there is risk of water
•
hammer effect in your
installation, always
use a water hammer
prevention equipment in
your installation. Consult
Professional plumbers
is you are not sure
that there is no water
hammer effect in your
installation.
Do not install on the
•
hot water inlet. Take
precautions against
of the risk of freezing
of the hoses. Water
temperature operating
interval shall be 33°F
(0.6°C) minimum and
100°F (38°C) maximum.
Use drinking water only.
•
Refrigerator / User Manual
Electrical requirements
Before you insert the plug
into the wall socket make
sure that the voltage and
the frequency shown on
the rating plate inside the
appliance corresponds to
your electricity supply.
Rating label is on the left
hand side of fridge inner
liner.
We recommend that this
appliance be connected
to the mains supply
via a suitable switched
and fused socket. The
appliance must be
positioned so that the plug
is accessible.
Should the mains lead
of the appliance become
damaged or should it need
Replacing at any time,
it must be replaced by
a special purpose made
mains lead which can only
be obtained from a Beko
authorised service agent.
5 / 26 EN
Advertisement
Table of Contents
