Advertisement
6. Attach one end of the 3/4 inch fl exible drain hose to
the 3/4 inch barbed drain adapter connection using the
supplied hose clamp. The supplied fl exible drain is 13
inches long. If a longer drain hose is required, it must
be installer-supplied.
7. Place the drain basin back into the water dispenser
and reinstall the two screws.
EZLMSN-EDFPVM214DK
Page 5
LZLMSN-EDFPVM214DK
8. Connect the drain adapter into the household waste
drain pipe.
If the p-trap is located inside a sealed walled, it must
have permanently-glued joints. If the p-trap is in an
accessible location, a standard non-glued p-trap is
acceptable.
Install the water dispenser's front cover.
9. Line up the front panel with the dispenser frame and
attach using the fl athead screws and a 3/32" hex
wrench.
10. Install the metal grate cover using the 4 Screws.
Note: Always consult local plumbing codes prior to
installation.
2000001276 (Rev. A - 01/24)
Advertisement
