Advertisement
Quick Links
SWIRLFLO
EZWS-EDFPBM117K
INSTALLER
NOTE: It is common practice to ground electrical hardware such as telephones, computers and other devices
to available water lines. This can, however, cause electrical feedback in the plumbing circuit, which
results in an "electrolysis" effect occurring in the fountain. This may result in water which has a
metallic taste to it or has a noticeable increase in the metallic content of the water.
When inspecting plumbing circuit, remember the line may be grounded some distance from the
installation, and may occur outside the building or area in which the unit is being installed.
This condition can be avoided (in most cases) by using recommended materials during installation.
Any drain fittings provided by the installer should be made of plastic which will electronically isolate
the fountain from the remainder of the building's plumbing circuits.
EDFPBM117WS
INSTALLATION & USE MANUAL
Fountains with FLEXI-GUARD
®
and ezH2O
Review these instructions before beginning installation. Be sure that installation
conforms to all plumbing, electrical and other applicable codes.
When installation is complete, ensure these instructions are left in the plastic bag
provided inside the installed unit for future reference.
Service to be performed by authorized service personnel only.
EDFPBM117WS-F
Bottle Filler
®
LZWS-EDFPBM117K
Page 1
®
2000000495 (Rev. A - 01/22)
Advertisement
Related Manuals for Elkay SWIRLFLO FLEXI-GUARD ezH2O EZWS-EDFPBM117K
Summary of Contents for Elkay SWIRLFLO FLEXI-GUARD ezH2O EZWS-EDFPBM117K
- Page 1 EDFPBM117WS EDFPBM117WS-F INSTALLATION & USE MANUAL SWIRLFLO Fountains with FLEXI-GUARD ® ® and ezH2O Bottle Filler ® EZWS-EDFPBM117K LZWS-EDFPBM117K INSTALLER Review these instructions before beginning installation. Be sure that installation conforms to all plumbing, electrical and other applicable codes. When installation is complete, ensure these instructions are left in the plastic bag provided inside the installed unit for future reference.
- Page 2 EDFPBM117WS EDFPBM117WS-F Figure 1 - Rough-in Dimensions 2000000495 (Rev. A - 01/22) Page 2...
-
Page 3: Required Tools And Materials
EDFPBM117WS EDFPBM117WS-F TO BUBBLER TO BUBBLER REQUIRED TOOLS AND MATERIALS These tables show special tools and/or additional materials (not provided) which are necessary to complete installation of these units: Special Tools Description Quantity Item NONE Additional Materials Not Included Quantity Item Description Unplated copper inlet pipe... - Page 4 EDFPBM117WS EDFPBM117WS-F 27, 28, 29, 30, 31 8. Install fountains with (8) 5/16-18 HHMS & (8) 5/16-18 nuts (provided) (Fig. 5). Connect the ¼” water lines from each fountain to the remaining openings on the tee at the remote chiller (cut lines to fit as needed). 9.
-
Page 5: Water Inlet
EDFPBM117WS EDFPBM117WS-F WATERSENTRY PLUS FILTER PARTS LIST ® (See Fig. 7) ITEM PART NO. DESCRIPTION 3/8” 51300C Filter Assy-3000 Gal. Water 51469C Assy-Filter & Brkt includes Fltr Head/ Inlet Mtg Brkt/John Guest Fittings/Screws Figure 7 See Fig. 6 Filter Head Assembly used after 01/01/2021 See Fig. - Page 6 EDFPBM117WS EDFPBM117WS-F BF11 - BF12 PROGRAM SETTING THE CONTROL BOARD VERIFY CONTROL BOARD SOFTWARE Continued from below: 1) To verify the software program of the control board the unit will 3) When display shows “UNIT TYPE” push program button once the need to be shut down and restarted.
- Page 7 EDFPBM117WS EDFPBM117WS-F MAIN PANEL DRAIN LOCATION JUNCTION MOUNTING FILTER MOUNTING FRAME DRAIN (OPTIONAL) FRAME LOCATIONS NOTE: Bottle filler back cover removed from the view for clarity Figure 10 FIVE PIN CONNECTOR MAIN BOARD FOUR PIN CONNECTOR WHITE I.R. BOARD SOLENOID WHITE NEUTRAL BLACK...
-
Page 8: Installation Package
FOR PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR CALL 1.800.834.4816 REPAIR SERVICE INFORMATION TOLL FREE NUMBER 1.800.260.6640 ELKAY MANUFACTURING COMPANY • 1333 BUTTERFIELD ROAD SUITE 200 DOWNERS GROVE, IL 60515 • 630.574.8484 • www.elkay.com 2000000495 (Rev. A - 01/22) Page 8...