Advertisement
4-Mbyte RAM SIMM Installation — (4690F4M)
Phaser III PXi
Phaser 300i
1.
Power down the printer. Do not unplug the printer; this preserves a
ground path to dissipate static charges. Disconnect the host interface
cables.
2.
Remove the two screws securing the image processor board in place.
Grasp underneath the rear panel and slide the image processor board
out of the printer card cage. Do not pull on the connector bails.
Printers
B01XXXX
to B06XXXX
Printers
B10XXXX
and
Phaser 300i
12
8345-35A
Advertisement
