HELIX V EIGHTEEN DSP User Manual page 32

ACO platform features
Beside the unique DSP sound effects the
V EIGHTEEN DSP provides a bunch of new sys-
tem and DSP features.
In the DCM menu of the DSP PC-Tool software in-
dividual settings can be made for several of these
system features.
Turn On & Off Delay
This function allows to determine the delay time
with which the integrated DSP is switched on and
off. The factory setting is 0.2 seconds. The delay
time should only be modified if there are e.g. nois-
es while switching on / off the amplifier.
URC Setup Switch Configuration
The ACO provides ten internal memory locations
for sound setups instead of the common two.
By using an optional URC remote control or the
Control pushbutton (see page 21, point 3) it is
possible to toggle between two of the ten mem-
ory locations. These two memory locations can
be determined in the "URC Setup Switch Config-
uration". The memory locations one and two are
preassigned by default. To switch between all in-
ternal memory locations, the optionally available
remote controls DIRECTOR and CONDUCTOR
are recommended.
32
Remote Output Configuration
This function controls if the remote output (which
switches on and off the connected amplifiers) will
be temporarily deactivated during a sound setup
switch. This function is activated (ON) by default.