Impulse Dynamics OPTIMIZER Lite System Patient Manual page 58

ETSI EN 301 489-1 and ETSI EN 301 489-27
GUIDELINES AND MANUFACTURER'S DECLARATION – ELECTROMAGNETIC
EMMISSIONS OF THE VESTA CHARGER PURSUANT TO:
ETSI EN 301 489-1 V2.2.3 – ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 1: Common technical requirements; Harmonised
Standard for ElectroMagnetic Compatibility
ETSI EN 301 489-27 – ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 27: Specific conditions for Ultra Low Power Active
Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P) operating
in the 402 MHz to 405 MHz bands; Harmonised Standard covering the essential
requirements of article 3.1(b) of Directive 2014/53/EU
The Vesta Charger, part of the OPTIMIZER Lite System, is intended for use in an
electromagnetic environment as specified below. The customer or user of the Vesta
Charger must ensure that it is used within the specified environment.
There may be potential difficulties in ensuring electromagnetic compatibility in other
environments, due to conducted as well as radiated disturbances.
Emissions Test
Radiated Emissions
Conducted Emissions
Harmonic Current
Emissions
Voltage Fluctuations
Basic Standard
EN 55032
EN 55032
IEC 61000-3-2
IEC 6100-3-3
52
Compliance
N/A – covered The Vesta Charger must
by relevant emit electromagnetic
radio energy in order to perform
standards its intended function.
Nearby electronic
Pass
equipment may be
affected.
Pass
Pass
Electromagnetic
environment –
guidelines