Using The Stormscope Pane - Garmin CIRRUS PERSPECTIVE TOUCH+ Cockpit Reference Manual

Hazard Avoidance
Strike is less than 6 seconds old
Strike is between 6 and 60 seconds old
Strike is between 1 and 2 minutes old
Strike is between 2 and 3 minutes old

USING THE STORMSCOPE PANE

Displaying the 'Stormscope' Pane:
From MFW Home, touch Weather > Weather Selection > Stormscope > Stormscope
Settings.
Selecting a Stormscope Operating Mode on the 'Stormscope' Pane:
1) From MFW Home, touch Weather > Weather Selection > Stormscope > Stormscope
Settings.
2) Touch either the Cell Button or the Strike Button. Button annunciator is green for
currently selected mode.
Clearing Stormscope Information on the 'Stormscope' Pane:
1) From MFW Home, touch Weather > Weather Selection > Stormscope > Stormscope
Settings .
2) Touch the Clear Stormscope Lightning Button.
Enabling/Disabling Stormscope Lightning Information on the PFD maps:
1) From PFW Home, touch PFD Map Settings .
2) If not selected, touch either the HSI Map or Inset Map Button to allow for selection of
map overlays.
3) Scroll if necessary, and touch the Stormscope Lightning button to enable/disable
Stormscope information.
Or:
1) With either the Inset Map or HSI Map shown, press the PFD Map Settings Softkey.
2) Press the Stormscope Softkey.
Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
128
Lightning Age
Lightning Age and Symbols
Symbol
190-02954-01 Rev. A