Xerox DocuPrint 100MX Security Manual page 10

System Service
Secure Network
Settings
Secure Sendmail
Security Warning
Banners
RC2 Service
S40LLC2
S47ASPPP
S70UUCP
S71LDAP.CLIENT
S72AUTOINSTALL
S72SLPD
S73cachefs.daemon
S73NFS.CLIENT
S74XNTPD
S74AUTOFS
S80SPC
S88SENDMAIL
S89bdconfig
S90WBEM
S93cacheos.finish
S94ncalogd
S95ncad
6
Force sendmail to only handle outgoing mail. No incoming mail will be
handled by sendmail.
Enable security warning banners to be displayed when a user logins
or telnets into the Xerox FreeFlow Print Server. The warning message
explains that only authorized users should be using the system and
that any others face the possibility of being monitored by law
enforcement officials.
Table 2-3
"INIT" tab RC2 section
Class II logical link control driver
Asynchronous PPP link manager. This service is re-enabled via
enable-remote-diagnostics command.
UUCP server
LDAP daemon to cache server and client information for NIS lookups.
Script executed during stub JumpStart or AUTOINSTALL JumpStart
Service Location Protocol daemon
Starts cachefs file systems
NFS client service. Disables the statd service which is only required if
your system is an NFS server or a client.
The automountd service is only required if your system uses NFS to
automatically mount file systems. Stopping the autofs subsystem will
kill the running automountd daemon and unmount any autofs file
systems currently mounted.
SunSoft Print Client daemon
The sendmail daemon is used to send mail over the internet. If
sendmail is not required, it can be disabled.
Solaris serial device.
CIM Boot Manager. Disables WBEM clients from accessing the Xerox
FreeFlow Print Server.
Starts cachefs file systems.
Solaris network cache and accelerator.
Description
Description
Security Guide