Special Functions - Whirlpool SmartCook SMO 654 OF/BT/IXL Owner's Manual

Owner's manual
CONTROL PANEL LOCK
To prevent the hob from being switched on accidentally, press and hold
down the OK/Control Lock-3 sec control for 3 seconds. An acoustic signal and
a light above the symbol will switch on to indicate that the lock is in place.
The control panel is locked except for the switch o function.
To switch o the control lock, repeat the activation process. The light will
switch o and the hob controls are again active.
PAUSE
The Pause function interrupts hob operation for about 10 seconds. During this
time, it is possible to clean the surface around the controls without altering any
presets. After this time, the hob will go back to operating as normal.
TIMER
The timer can be used to set a maximum cooking time of 99 minutes.
The timer setting can be used on each cooking zone, following the same
procedure. The timer always shows the time set for the selected area, or the
shortest remaining time.
FUNCTIONS
FLEXIBLE AREA
Select the "Flexible Area" control to control two cooking zones at the same time.
It is possible to use both slider controls at the same time to control the power.
Using this function is ideal to increase the cooking zone with the advantage
of positioning cookware as needed within the selected area. Ideal for using
oval or rectangular pans or grill pans.
HORIZONTAL FLEXIBLE AREA
This can be used to control the rear cooking zones at the same time. Both
central controls can be used at the same time to control the power.
Covering the whole activated area will achieve the maximum available power.
To switch on the Flexible area function:
1.
Switch on the hob.
2. Press the control for the Horizontal Flexible area. Both areas will be
connected and the displays will read "0".
3.
Using the slider, select the power level you require.
To switch o the Flexible area function:
Press the control for the Flexibile area that is functioning: the cooking zones
will go back to operating individually.
The Flexible area function will also switch o when the hob switches o at the
end of cooking.
For the best results, always cover at least one or more points marked on the
glass surface or inside the Flexible area.

SPECIAL FUNCTIONS

Min Med Max
6 SENSE
th
With the 6 Sense control, you can start the special functions.
th
1. Put the pan in place, switch on the hob and select the chosen cooking area
by touching the slider.
2.
Press the "6 Sense" control. The cooking zone display will read "A" (automatic).
th
3.
The indicator for the rst special function available for the selected cooking
zone will switch on.
4. Select the required special function by pressing the "6
5.
Press the control to con rm the required function
P
18
OFF
Min Med
Sense" control.
th
.
To start the timer:
1.
Switch on the required cooking zone by pressing any part of the slider.
2.
Press the "+" or " " control to set the required time. The display will read "00".
When the set time is up, an acoustic signal will sound and the cooking zone will
switch o automatically.
To change the timer setting:
1. Press the slider control for the cooking zone.
2. Press the "+" or " " control to change the required time.
To switch o the timer:
Press the "+" and " " controls together until the timer switches o .
P
18
OFF
Max
Min Med
Once activated, each special function can be used to set the optimim cooking
level by selecting the presets and adjustments (MIN-MED-MAX).
Min
The function automatically suggests an intermediate level by default.
During use, if necessary, it is possible to move to a lower/higher level according
to cooking progress, to optimise time and condition (e.g., boiling level of
water).
P OFF
18
Min Med
Max
Med
EN
P
18
Max
P
18
Max