Protecting Spot Colors In The Workflow - Xerox DocuColor 7000AP Release Notes

Key Features

Protecting Spot Colors in the Workflow

If necessary, in the
7. Corrected
Click .
8. Apply
A similar procedure is performed to define CMYK colors as spot colors.
Once you have defined spot colors to protect, you need to indicate in the job
workflow if one or more of these spot colors should be protected.
On the tab, under
Color
added for protecting spot colors:
•
: to retain RGB colors as defined
Protect RGB colors
•
: to retain gray colors as defined
Protect Gray colors
•
: to retain CMYK colors as defined.
Protect CMYK colors
Note: If you protect RGB or CMYK colors, all colors in the job with that specific
combination will be protected. For example, a specific color combination used in
a logo may align with a color used in an image in the job. The spot
transformation affects the image color as well as that of the logo, sometimes to
undesired results.
column, adjust the CMYK values.
parameters, two check boxes have been
Spot workflow
19