Xerox DocuColor 7000AP Release Notes page 11

Key Features
To Create a New Template
From the list, select an imposition method.
1. Method
Click .
2. New
Type the name of the new template, and press E
3.
In the area, type the number of columns and number of rows that you
4. Layout
need.
The imposition method that you select determines the number of columns and
rows that you can enter. For
to 64 pages on one sheet (8 × 8). For
can place up to 625 pages on one sheet (25 × 25).
Under , select
5. Type Simplex
Under , select
6. Orientation
Note: The Orientation setting in the Imposition Template Builder is for
display purposes only. This parameter is not saved in the template. (You set
job orientation on the Imposition tab, under Sizes.)
From the list, select the appropriate binding method.
7. Binding
Note: Binding is available only when Saddle Stitch and Perfect Bound
imposition methods are selected.
Click .
8. Save
All saved templates appear on the
method the related templates appear in the
,
list. See Table 1. For example, if you created a
template appears in the
Layout
imposition method.
Some templates appear under more than one imposition method.
NTER
and
Saddle Stitch Perfect Bound
Step & Repeat
or .
Duplex
or .
Portrait Landscape
tab. After you select an imposition
Imposition
parameters, in the
Template
Step & Continue
list only when you select the
.
, you can place up
and , you
Step & Continue
Layout
template, the
Step & Continue
7