2.5 Initial Settings
2.5.1 Set the Date and Time
We recommend you to set up date and time before initial use.
To set the correct date and time, do the following:
1.
In the recording screen, touch the panel to wake up function bar.
2.
Touch icon
3.
Touch icon
4.
Touch [Settings] sheet to enter setting.
5.
Slide the sub-menu up and down to select [date/time].
6.
Touch [+][-]to change the number, and then touch [OK] to confirm
setting.
7.
Repeat step 6 until all date and time setting completed. Touch [OK]
to return to previous page.
8.
Touch icon
on function bar to stop recording.
to enter Menu.
to return to recording screen.
13