Xerox 4890 Product Reference page 85

XEROX 4890 HIGHLIGHT COLOR LPS PRODUCT REFERENCE
Table 6-3.
Job features
from 4850 (V3.7)
Programmable Job prints if LPS has a bypass transport and the finishing
bypass transport device is required by the job; otherwise, it does not run.
Accounting sheets and error message pages go to the
sample tray.
Clusters Job prints. Operator needs to redefine clusters if trays differ.
Color Job waits in a queue until requested color is implemented.
Edgemarking Job prints.
Fonts
LPS or if substitutions for these fonts are defined.
Graphics Job prints if graphic memory is available, input source is 300
dpi resolution, and graphic files are loaded.
Labels Job prints using only paper-faced labels.
Page density Job prints.
Paper sizes Job prints.
Paper stock Job prints.
Stitch commands Document is stitched if stitcher option is implemented.
Transparencies Job prints. Transparencies must be loaded as a special stock
in tray 1 or 2, and delivered to the sample tray.
Will this 4850 (V3.7) job print on my 4890 (V4)?
Results when run on 4890 (V5)
Job prints if the fonts and character sets are loaded on the
LPS COMPARISON
6-5