Xerox 4215 Installation Planning Manual page 37

PREPARING THE INSTALLATION CHECKLISTS
Completing Checklist 6: Set Interface—Parallel, Serial, Other I/O
Enable interface
Enable interface
5-4
You can access the lock feature from the printer keypad. The
printer is locked or unlocked by pressing the Up and Down
arrow keys in the following sequence:
down
An asterisk '*' appears each time you press an arrow key. Press
Enter after the sequence.
You can restore the factory defaults to unlock the printer;
however, all other original settings are also restored. Use this
option only if you want to restore all factory defaults.
To restore factory defaults, press and hold Online and Help while
turning on the printer.
Parallel Interface
Allows you to enable or disable the parallel interface. When
disabled no jobs will be processed from the parallel interface.
Printer type Allows you to select the following settings:
• PS/PCL sensing (default)
• PostScript mode (Standard)
• HP LaserJet emulation mode
• PostScript mode (Binary)
• Hexadecimal dump mode
• PostScript mode (Tagged binary).
Serial asynchronous interface
Allows you to enable or disable the serial interface. When
disabled no jobs will be processed from the serial interface.
Printer type Allows you to select the one of the following Print Languages:
• PS/PCL Sensing (default)
• PostScript mode (Standard)
• HP LaserJet emulation mode
• PostScript mode (Binary)
• Hexadecimal dump mode
• PostScript mode (Tagged binary).
down up down
XEROX 4219/MRP AND 4215/MRP INSTALLATION PLANNING GUIDE