Completing Checklist 4: Setup Printer-Pcl 5 Setup - Xerox 4215 Installation Planning Manual

PREPARING THE INSTALLATION CHECKLISTS
Automatic tray switching
Completing Checklist 4: Setup Printer—PCL 5 Setup
5-2
Allows you to enable or disable the automatic tray switching
feature. When the primary tray is empty, the printer switches to
another tray with the same size paper.
Note: If the face up tray is installed all printer output will be
N
directed to that tray.
Orientation Allows you to select the default page orientation.
Portrait (default)
Landscape
Lines per page This is the maximum number of lines of data that the 4219/MRP
and 4215/MRP will print on a page before moving to the top of a
new page. Most applications will override this value.
Line Wrap This parameter determines if the printer should wrap lines of data
which extend beyond the right margin.
Symbol set A symbol set is a unique subgrouping of all the available
characters in a font. Each symbol set is designed with a specific
application in mind. The default symbol set for PCL is Roman-8.
Font Allows you to select a default font for the HP LaserJet emulation.
The available fonts are:
• Courier
• LinePrinter
• Times
• Universe.
Courier—If you select Courier as your default font, you can
select from among these pitch, point size, and style
combinations:
10 Pitch, 12 Point, Medium(default)
•
10 Pitch, 12 Point, Bold
•
10 Pitch, 12 Point, Italic
•
12 Pitch, 10 Point, Medium
•
12 Pitch, 10 Point, Bold
•
12 Pitch, 10 Point, Italic
•
12 Pitch, 10 Point, Italic
•
LinePrinter—If you select LinePrinter as your default font it will
be 16.67 Pitch, 8.5 Point, Medium.
Times and Univers—If you select Times or Univers as your
default fonts you can select one style (Medium, Bold, Italic, or
Bold Italic) and a font size. The point size is entered from the
keypad, within a range of 4.00 to 999.75 in increments of 0.25.
(The default for Times and Univers is 12 point medium.)
XEROX 4219/MRP AND 4215/MRP INSTALLATION PLANNING GUIDE