Xerox 4215 Installation Planning Manual page 28

XEROX 4219/MRP AND 4215/MRP INSTALLATION PLANNING GUIDE
Printer emulation setting
The printer's interface card device address switch is used in
conjunction with the test button to set the required printer
emulation. The device address switch and test button are
located on the twinax interface card. Tables 3-1 and 3-2 list the
options for the twinax and twinax IPDS printer emulations,
respectively.
Table 3-1. Twinax printer emulation settings
Address Printer emulation
0* 3812/5219/3816 SCS printers
1 5224 SCS printer
2 5225 SCS printer
3 5256 SCS printer
4 4234 SCS printer
5 3812/5219/3816 SCS printers
6 4245/6262 SCS printer
* Default setting
Table 3-2. Twinax IPDS printer emulation settings
Address Printer emulation
0* 3812/5219/3816 SCS printers
1 5224 SCS printer
2 5225 SCS printer
3 5256 SCS printer
4 4234 SCS printer
5 IPDS printer
6 4245/6262 SCS printer
* Default setting
You can change the printer emulation setting at any time. Refer
to the "Configuring the interface card" chapter in the Xerox
4219/MRP and 4215/MRP Mid Range Systems Printers Operator
Guide for further information.
PREINSTALLATION
3-5