Creep Adjustment; Duplex - Xerox 4110 Print Options

P O
RINT PTIONS

Creep Adjustment

Use this option to adjust images that may shift from the center of the sheet in booklet jobs.
Creep Adjustment is helpful in booklets that contain a large number of pages or when
booklets are printed on heavy media.
To use this option, you must set the Booklet Maker option to Saddle, Saddle (Right
N :
OTE
Binding), Perfect, or Perfect (Right Binding), with the Duplex option set to Top-Top.

Duplex

The Fiery EXP4110 printer is equipped for automatic duplex printing. When the Duplex
print option is set to one of the duplex settings, the printer automatically turns the paper for
printing on the opposite side.
T
O PRINT DUPLEX PAGES AUTOMATICALLY
1 Choose Print in your application and locate the Duplex print option.
The location of Fiery EXP4110 print options varies, depending on the printer driver that
you use.
2 Choose a Duplex setting.
Prints the top of the image on Side 1 on the same edge of the page as the top of the
Top-Top:
image on Side 2.
Prints the top of the image on Side 1 on the opposite edge of the page from the
Top-Bottom:
top of the image on Side 2.
The following table shows how Duplex settings correspond to printed output:
Portrait
Landscape
Top-Top
1 2
1 2
20
Top-Bottom
2
1
2
1