Table of Contents
Advertisement
20. Setting Controller
Operation mode for controllers and operation indicator settings can be edited in this section.
20.1 Setting Controller
Items
Run indicator
Filter sign reset target
Operation range during
monitor control
Periodic logging
Communication logging
Active / Inactive
Schedule setting from
Remote Access
A12124820A
Choices
Green / Red
Select the color for run indicator.
All units / Units with
Select all units or units with active fi lter sign only to command fi lter
active fi lter sign only
sign reset to.
Select control item variety range upon selecting multiple units/
Detailed / Simplifi ed
groups/blocks/areas or monitoring window.
Whether or not to acvivate periodic logging for schedule
Active / Inactive
management information, Run/stop state, temperature, indoor
temperature, outdoor temperature in SD card.
Active / Inactive
Select Active to save H-LINK transmission information on SD card.
Active / Inactive
Select Active to set schedule from Remote Access software.
1.
Tap [Controller setting] on detail
setting window.
Controller setting window is shown.
1
2.
Set each item. Refer to the following
table for a detail of setting items.
3
3.
Tap [
] to confi rm setting and to
return to detail setting window.
Tap [
] to discard the change and to
2
return to detail setting window.
Description
83
Advertisement
Table of Contents
